FET Audio | Hi-End Audio & Electronics DIY Electronics & Repair

October 27, 2009

PCM1704 to PCM63 Converter BD

Filed under: DAC — Spencer @ 10:43 pm

Since I have a PCM1702 to PCM63 converter board pcb, I have put a PCM1704 on same adaptor board for testing purposes.  The only difference is two supply pins +/-5V need to be reversed.  Thus I do cut trace and add two hard wires at the bottom of the board to fit the supply reverse for PCM1704 DAC chips.

For Capacitor, I use Panasonic FC and also Wima MKS film capacitor for supply decouple as in the pictures.

For PCM1704, the noise floor is a bit lower as you can see from the FFT measurement.

D1V33 FFT with PCM1704

D1V33 FFT with PCM63 lin

Related Images:

No Comments

No comments yet.

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Powered by WordPress