Yamaha F1030 – B1 Active Crossover idea

I do not have this equipment but I only have this service manual.  The manual is useful as a analogy active crossover using Buffer stages.  I have attached the circuit diagram of this crossover here and you can use the NP B1 buffer to replace the transistor buffer and then you will get a good B1 active crossover.

I have not tried B1 active crossover using this design yet as I do not need a crossover at this moment.

There is a diyaudio discussion about B1 active crossover @diyaudio.

F1030 circuit here:

F1030 Circuit1

Comments are closed.