FET Audio | Hi-End Audio & Electronics DIY Electronics & Repair

December 17, 2009

D1V3 DAC from David – HK

Filed under: Gallery — Spencer @ 10:28 pm


Hi! Spencer: My D1V3 complete. I order the kit in 2008.02 but 2009.09 start assembly. I use 4-PCM1702UK, DIR9001 and SM5842AP.
I buy 2 round transformers from Shenzhen, but when I do test the transformers all burnt ! so I buy 2 from Wha Fei. The FC 1000uf foot print bigger than the PCB. I make a out side power supply.
I go to Chaiwan a steel shop cut and bend the steel sheet (thickness 1mm) for the chassis.  I pay HKD100.00. Then I open the connector holes, brush paint.
The DAC is good sound more detail, compare to my DAC3 – PCM1732 with HDCD (from Taiwan DIYZONE.NET).
Thank you for provide this good kits and your help during my assembly.  I am an old man and have family work.  So take long time to complete the DAC.  David

Update on Dec 27, 2009: Spencer: I replaced the PCM63 to my D1 V3 make some adjustment . Today play music all day. The PCM63 is better bass and more detail. . Thank you . David

Related Images:

No Comments

No comments yet.

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Powered by WordPress